Download Datasheet

Highlights:

The CAT-3-LC are Paper Loop Controlled Label Rewinders / Unwinders with adjustable tension. The CAT-3-LC is designed with two horizontal support rods so a 'loop' of label stock can be created between. There is a photo-detector that observes, so when the loop is no longer at optimum length, it will turn the rewinding action on or off. The loop length can be adjusted by the position of the photo-detector beam. The CAT-3-LC can also be turned into an Unwinder by a switch.

Servicing & Repair | Labels & Ribbons

Description:

There are three models of the CAT-3-LC, These are the CAT-3-LC standard, CAT-3-LC-D300 and CAT-3-LC-D400. Below is a description of each model. The CAT-3-LC is Standard delivered with a C-76170, LABELMATE's durable 'Quick-Chuck' 'TM'and an external flange. Other 'Quick-Chuck' sizes are available on demand. Torque and Direction are fully controllable from the Control Panel. All models are bi-directional. CAT-3-LC-D300 The CAT-3-LC-D300 will accept rolls up to a 300 mm diameter. CAT-3-LC-D400 Such as the CAT-3-LC-D300, the CAT-3-LC-D400 is delivered with a C-76170, LABELMATE's durable 'Quick-Chuck' 'TM' quick-locking Core Chuck, permitting the fastest loading and unloading of cores and label rolls. The CAT-3-LC-D400 accepts rolls up to 400mm diameter. The CAT-3-LC-D400 is available for 38-, 40-, 44-, 70-, 76- and 100 mm cores. Torque and Direction are fully controllable from the Control Panel. All models are bi-directional. All LC-CATs are supplied with the adequate power supply.